Skip to content
    Online Program
    Dates not announced yet

    Case Western Reserve University Pre-College Programs Engineering Online Pre-College Program

    by Case Western Reserve University Pre-College Programs

    • Online

    Engineering: From 2D Sketch to 3D Model is a self-paced online course from Case Western in which you learn to sketch objects in 2D and then build them as 3D models in Tinkercad, a computer-aided design (CAD) program. Lessons are pre-recorded videos you fit around school, with a mentor answering your questions and reviewing your assignments. The course ends with a final project, a 3D model of a design you choose, and students who complete it earn a certificate of completion from the university.

    Facts checked against the official page on 16 Nov 2026 · Editor: Sean StevensSean Stevens · Sources

    At a glance

    Official facts · checked 16 Nov 2026
    DatesNot published
    Not announced yet
    Who can applyOfficial
    At least 13 years old. Currently enrolled in high school (or a U.S.-high-school equivalent) or within one year of graduating
    Total costOfficial
    $1,595
    Format and placeOfficial
    Online
    Length
    2 or 4 weeks (20 to 25 hours total)
    Included / budget separately
    Separately: Computer, mouse, printer access and internet connection (not included in tuition)
    Deposit and refunds
    Cancel at least 7 calendar days before your scheduled start date: 100% of tuition paid is refunded
    Financial aid
    Need-based scholarships for students who show financial need and high potential
    Apply by
    Not publishedNot announced yet
    Cohort and selectivity
    Applicants send basic details and a short personal statement and get a decision by email within about a week. No acceptance rate or cohort size is published
    Credit or certificate
    Certificate of Completion from Case Western Reserve University, for satisfactory completion of at least 70% of assignments and the final project

    Get the key facts by email

    The dates, costs and how to apply, all in one place.

    Engineering Online Pre-College Program

    Succeed's assessment

    Should you apply?

    Succeed

    In short

    It's good value for a beginner who works well alone and wants a finished 3D model of their own design to show for it. Students who already use CAD, or who need live teaching, will find $1,595 buys less than they'd hope.
    • Why it's worth it

      The course has a concrete end point, a 3D model you design yourself with mentor feedback before you finalize it, so you finish with something you can actually show rather than a set of notes.

    • What it asks of you

      Besides the fee, you'll need to put in 20 to 25 hours of work on your own, and you'll need a Windows, Mac or Chromebook computer with a two-button mouse rather than just a phone or tablet. With no deadlines until the session ends, it's easy to leave everything to the last few days.

    • Who should skip it

      Students who already design in CAD, since the course starts from 2D sketching and works with Tinkercad's pre-made shapes, and students who learn best with a teacher in the room, because every lesson is a recorded video and help comes by message.

    How does a self-paced course with a mentor work?

    Everything is pre-recorded, so there are no live classes, no Zoom calls and no set log-in times. You watch the video lessons, do a module assignment after each unit and build toward the final project whenever it suits you, as long as everything is in before your session's end date. Your mentor answers questions and gives feedback through the Canvas inbox, discussion boards and assignment reviews. Case Western says mentors are most active during daytime hours in US time zones, so if you live far from the US, replies may take a while to reach you.

    The two- and four-week sessions have identical content and the same number of assignments, and the longer ones simply fall during the school year. Case Western puts the course at 20 to 25 hours in total, which works out to roughly 10 to 13 hours a week over two weeks or about 5 to 6 hours a week over four. You keep view-only access to the materials for a month after your session ends.

    Who will you be learning from?

    The course was designed by two staff from Sears think[box], Case Western's innovation center and makerspace. Ainsley Buckner directs prototyping, art and community engagement there, is a certified instructor for Stratasys' additive manufacturing certification and teaches part time in the engineering school. Jason Bradshaw directs design and manufacturing, spent more than 20 years as a mechanical engineer designing tooling and equipment, and has taught manufacturing, design and computer-aided engineering at Case Western for the last decade.

    Case Western's faculty teach through pre-recorded video, so the person you actually talk to is your mentor. Case Western names two: Angelo, a mechanical engineering undergraduate on the university's Baja SAE off-road racing team with more than four years of SolidWorks experience, and Kevin, a mechanical engineering graduate who built race cars with CWRU Motorsports. Mentors are real people, not AI, although Case Western doesn't say how many students each one supports.

    Who can apply, and what does the application ask for?

    You can apply if you're at least 13 and either in high school (or the equivalent outside the US) or no more than a year past graduating. Case Western doesn't accept college students or adults. International students are welcome without an English test, but the application must be written in English and the course is taught in it.

    There are no transcripts, grades or recommendation letters to send. The form asks for basic details and one brief personal statement on why you want to take the course, which Case Western calls the most important part of the application. It takes 20 to 30 minutes, and you can save it and finish later. A decision arrives by email within a week, sometimes a few days longer at busy times.

    What does the course really cost?

    The course costs $1,595 whichever session you pick, and Case Western says there are no additional fees. That buys the video lessons, mentor support, feedback on your final project and the certificate if you meet its requirements. The equipment is yours to supply: a computer running Windows 10 or later, Mac OS X 10.10 or later, or Chrome OS, a mouse with a scroll wheel and two buttons, access to a standard printer, a phone or tablet for taking photos, and a strong internet connection.

    Tuition is due the day before your session starts, but your place isn't confirmed until you've paid, so it's safer to pay when the acceptance email arrives. You can cancel for a full refund up to seven calendar days before the start. From six days out nothing is refunded, although you may be able to switch to another session or course.

    Need-based scholarships are available for students with financial need and high potential. You request one on the confirmation page after submitting your application, and Case Western doesn't publish award amounts.

    What do you leave with?

    If you complete at least 70% of the assignments satisfactorily and submit the final project by your end date, Case Western Reserve University emails you a Certificate of Completion. Work is marked Complete or Incomplete, with no letter grades, and the course carries no college credit and produces no transcript. Fall short of the 70% mark and you get no certificate and no refund.

    The other thing you keep is the final project, a 3D model of a design you choose, such as board game miniatures, an architectural model, a desk organizer or a remote-control car body. You hand it in as a model file, as screenshots from three views or as a 3D print. Case Western says the course gives no advantage in its own admissions and suggests listing it on college applications as an extracurricular or experiential activity rather than as coursework.

    Sean, founder of Succeed

    Sean

    Founder, Succeed

    Talk it through with Sean

    Want to talk it through?

    “I can help you compare the programs you're considering, think through the practicalities and work out what makes sense for you.”

    20 minutes · No obligation to enroll

    What should you do next?

    Choose your session before you apply. The two-week run from 20 December 2026 to 3 January 2027 fits the holidays, while the four-week runs starting 3 January or 28 February 2027 spread the same work more thinly around school. It's also worth drafting your short personal statement on why you want to take the course before you open the form.
    Get next-cycle reminder

    Similar programs

    Save this program in Succeed to compare it with similar programs, dates, costs and formats in one place.

    Compare with other programs

    Frequently asked questions

    The course is designed by Case Western Reserve University staff and the certificate comes from the university, but the program is supported by Kaplan North America, and the terms you agree to are with Kaplan. It's a non-credit enrichment course, not a regular university class.

    Case Western describes the course as an introduction that begins with 2D sketching before moving into Tinkercad, and the application asks only for basic details and a personal statement.

    No. You can submit your final model as a file or as screenshots from three views, and printing it is optional, with the course showing you where you can get it printed. You do need access to an ordinary paper printer.

    Sources

    Facts checked against the official page on 16 Nov 2026

    Editor: Sean Stevens

    Spot an error? Report it

    How we check